Download TWRP 3.2.1 for Alcatel Pop C2

Rooting your Android device is usually very easily via a custom recovery. From here, you can download the unofficial TWRP for Alcatel Pop C2 and use

Similar articles

 Rooting your Android device is usually very easily via a custom recovery. From here, you can download the unofficial TWRP for Alcatel Pop C2 and use it to install custom roms or patches on your Alcatel Pop C2.

And of course, you can root using magisk or SuperSu once you have TWRP install pretty easily.

About the TWRP

TWRP is an open-source, community project. TWRP development is done by roughly 4 people at this point. We also have a large support community with many people who are willing to answer questions and help people with their devices either through our IRC channel or on forums like xda-developers.

Team Win was originally formed to work on porting WiMAX to CM7 for the HTC EVO 4G. After our work on the EVO 4G we wanted to work on a project that would work on more devices than just the EVO 4G and we settled on working on a recovery. Today TWRP is the leading custom recovery for Android phones.

A custom recovery is used for installing custom software on your device. This custom software can include smaller modifications like rooting your device or even replacing the firmware of the device with a completely custom "ROM" like OmniROM

You can find the source code for TWRP at github.com/teamwin/android_bootable_recovery/

TWRP 3.2.1 for Alcatel Pop C2 

Download Link

[##download## Download]

Installation

You can either install TWRP image by flashing as stock firmware part or via fastboot mode. Below we have explained how to install TWRP via fastboot.

To install this TWRP on your Alcatel Pop C2, you will have to first unlock the bootloader. And the flashing process will take place via fastboot mode.

USB Debugging needs to be enabled on your Android. 

Enabling USB debugging

• Go to settings and then click on About phone.
• Next, in phone information, look for build number and hit on it until you get the message "You are now a developer"
• Head back to the settings menu and locate "Developer options"
• Open the developer options and toggle on the dev options.
• Also, toggle on OEM unlocking.
• Next, head down and enable USB debugging. Confirm and then connect your phone to the computer? Where you are prompted to grant permission, confirm it.

Flashing TWRP 

• Download & extract ADB Minimal Tool
• Download and Extract recovery.img  In Platform tools (ADB Minimal Tool) Folder.
• Reboot Phone to bootloader by together holding Volume Down and Power Button
• Connect Phone to PC using the usb cable.
• open CMD in the Platform tools Folder and Send run the following Code to check if the device is connected.

fastboot devices

• Next, unlock the bootloader using the following code

fastboot flashing unlock

• And now to flash the TWRP, send the code below and hit enter

fastboot flash recovery recovery.img