This Tecno Camon 11 CF7/CF7K DA bin file will be handy when flashing your device. In most cases, you will also require this file to bypass frp on you
Similar articles
This Tecno Camon 11 CF7/CF7K DA bin file will be handy when flashing your device. In most cases, you will also require this file to bypass frp on your Tecno Camon 11 using flash tools like NCK Dongle Android MTK, SP Flash tools etc.
Tecno Camon 11 CF7/CF7K Key specs
- Model: Tecno CF7 / CF7k
- Colours: Black, Blue, Red
- Body Material: Plastic, Metal
- SIM Count: Dual Sim
- SIM Type: Nano Sim
- 2G: Yes
- 3G: Yes
- 4G: Yes
- Platform: Android 8.1 Oreo (HiOS 4.1)
- Chipset: MediaTek MT6761 / MT6739
- Processor: 4x 2.0 GHz ARM Cortez-A53
- Cores: Quad-core
- GPU: PowerVR GE8300, 933 MHz
- RAM: 2 / 3 GB
- ROM: 16 / 32 GB
- Memory Card Support: Yes
- Body Dimension: 76.05 x 156.65 x 7.9 mm
- Display: 5.5-inch, IPS LCD capacitive touchscreen, 720 x 1520 pixels
- Rear Camera: 13 + 2 MP
- Front Camera: 16 MP
- WLAN: Wi-Fi 802.11 a/b/g/n
- Wi-Fi Hotspot: Yes
- Bluetooth: Yes, 4.2 with A2DP
- Sensors: Proximity, Accelerometer, Light, Compass, Fingerprint
- Battery: 3750 mAh Li-Polymer (non-removable)
Using the DA file
You can import and use this DA file with SP flash tool any other MTK flash tool like NCK Dongle. If you are using NCK dongle, then proceed thus;
- Next, extract and launch the loader of NCK dongle.
- Once it opens, click on the setting tab and load Tecno Camon 11 CF7/CF7K custom DA file from where you extracted.
 |
| loading Tecno CF7/CF7K DA file on NCK dongle |
- After loading the DA file, head back to the services tab and click on Reset FRP.
 |
| Click on reset FRP under services |
- At this point after clicking on the "Reset FRP" button, power off your device and connect to the computer via USB.
 |
| Power off the device and connect to the Computer |
- Now with the drivers installed, and your charging circuit working perfectly, the NCK dongle should be able to detect your device
- The bypassing process will take only a couple of seconds.
- Once done with the bypassing, you should have a screen like the one below.
 |
| Tecno CF7/CF7K frp reset done |
😌 😌 ☺️ After following all the above steps, you must have successfully reset FRP on your Tecno CF7/CF7K
COMMENTS