HOW TO FLASH WITH SP FLASH TOOL
Similar articles
ABOUT
SP flash tool is an application which mainly helps you to flash Stock ROM, Custom recovery and fixing in some extreme cases ( firmware update, Flash recovery, unbrick bricked android device etc.). SmartPhone FlashTool is working with MediaTek Android smartphones (MTK based) You can Download SPFlashTool from our download section. You need to load scatter file for MTK based device for functioning
SP FLASH TOOL PREREQUISITES
- Pc or Laptop
- USB data cable for your device
- MediaTek USB VCOM drivers
- Stock rom for your device to be flashed.
FLASHING PROCEDURE:
- Start by installing the Android USB Driver on your computer. You will not need to do this again if the drivers are already installed on your computer.
- Next, switch Off your Android and remove the Battery.
- Extract your downloaded rom to your PC.
- Extract SP Flash Tool on your Computer.
- Open Flash tool.exe. and execute.
- Once SP Flash Tool is launched, Click on the Download tab(1).
- On the Download tab, click on the scatter-loading button(2).
- Locate the Scatter File from your extracted rom folder. After loading scatter, chose the flashing mode by clicking on the dropdown menu indicating Download(3)
- Click then on the Download Button(4) to begin the Flashing Process.
- Connect your Smartphone to the Computer using USB Cable with or without battery if you wish.
- Once the Flashing is completed, a Green Ring will appear. Now you have successfully flashed your phone.
DOWNLOADS:
DRIVERS: DOWNLOAD MTK USB DRIVES
SP FLASH TOOL: GET FLASH TOOL HERE
COMMENTS