Privacy protection is one of the key security features in Android devices nowadays. This is a built-in security feature that was added to most Android devices running Android OS 4.3 Jelly Bean and has been further enhanced in recent Android versions of smartphones. A good example of devices where the privacy lock has been well improved is the Itel A32F running on Android 8.1 Oreo. Privacy protection was designed to eliminate any unauthorised user from accessing and using the device without the required pin. Of course, this security feature would only take effect if it was enabled.
Privacy protection is one of the key security features in Android devices nowadays. This is a built-in security feature that was added to most Android devices running Android OS 4.3 Jelly Bean and has been further enhanced in recent Android versions of smartphones.
A good example of devices where the privacy lock has been well improved is the Itel A32F running on Android 8.1 Oreo. Privacy protection was designed to eliminate any unauthorised user from accessing and using the device without the required pin. Of course, this security feature would only take effect if it was enabled.
That been said, it has become well know that most MTK Android usually get locked by the privacy protection out of the blue!. Although things seem it may haapen that the owner of the device setup anti-theft feature without really knowing during the device setup process for the first time.
Anyhow, no matter what may be the cause, today In this tutorial, we will guide you on how to bypass this lock on your Itel A32F in just a matter of seconds.
Requirements for this tutorial
- A Computer
- A micro USB cable which is well functioning
- Android MTK USB drivers
- Miracle Box Thunder edition
- [message]
- ##check## Read also:
Privacy bypassing procedure
- Start by downloading and installing Android MTK USB drivers on your computer if you do not have it installed yet.
- Next extract the Miracle Box thunder edition cracked you downloaded from the link above and install
- Once the installation is done, launch and wait for it to open.
- Now proceed thus;
- Click on the MTK tab(1)
- Next on Unlock/Fix(2)
- Then check Clear Anti-theft(3)
- Allow booth as it is Auto connect(4)
- Hit the start button(5)
- You can now power oof your Itel A32F, remove and reinsert the battery.
- Connect it to the Computer and wait for the privacy lock to be removed.
- This process will normally take less than a minute!
- [message]
- ##warning## OPPPS!
- After bypassing privacy lock my Itel A32F powered on and requested for another passcode while displaying a dark screen and the keyboard could not even be enabled!
At this point, you will have to perform a hard reset then proceed with frp bypassing
![]() |
ITEL A32F FRP BYPASS STEPS WITH MIRACLE BOX THUNDER |
Now your device is back to normal.
COMMENTS