You can easily remove forgottern pattern on Tecno feature phones. This is the case of the Tecno T528; If you happen to be in trouble removing forgotten password on your Tecno T528, then this article is cooked specially for you ☺. Go through this guide and get all files, then follow the instructions in order to remove forgotten password on your Tecno T528 feature phone.
Similar articles
Removing forgotten password on feature phones may seem difficult since almost all do not support hard reset using key combinations like for say the Volume - and power button or Vol+ and power button as it is the case for Android devices.
If you happen to be in trouble removing forgotten password on your Tecno T528, then this article is cooked specially for you ☺. Go through this guide and get all files, then follow the instructions in order to remove forgotten password on your Tecno T528 feature phone.
Before we dive into the hard reset procedure, let us first take a look at some of the features of the Tecno T528 feature phone.
Tecno T528 Specifications
The Tecno T528 is a popularly used feature phone is most African countries like Cameroon and Nigeria. The device has an MTK Chipset with the chip type MT6260. Below are some of its core specifications;
- Brand: Tecno
- Model: T528
- Display: 2.8"
- Dimension: 130 x 57 x 14.5mm
- OS: MOS
- Storage: 16MB ROM + 8MB RAM
- Camera: Back Camera with flash
- Network: GSM Band: GSM900/DCS1800MHz
- Battery: 2500mah
- Other: Bluetooth, Dual SIM
Pre-requisites for this tutorial
The following will be required in order to remove password from your Tecno T528;
- GSM Aladdin Box or Miracle Box
- MTK USB drivers and CDC drivers
- A Computer
- A USB cable
- [message]
- ##book## Consider reading also:
How to proceed
- Start by downloading and installing MTK USB drivers and CDC drivers on your Computer.
- Next, download GSM Aladdin box from the link below and extract.
- Launch the loader of the extracted GSM Aladdin box and click on the MTK tab. Next, check on Read_Password then set the model option as Bot1(62xx). As for the "clear" option, you are not obliged to check it, but you can still check it.
- After configuring as mentioned above, click on the connect button.
- Once you click on the connect button, the start button will now display and you can click on it.
- Now as far as connecting the phone to the Computer is concerned, just simply connecting it like normal MTK Android devices will not work. For the tool to communicate with your device, you will need to press hold the "boot key" before plugging in the USB cable to the phone. So, what you have to do is press hold the "0" key and then connect the phone to the Computer. It will install the drivers then the process will commence.
- The reading of the password will only take a couple of seconds. Once done, you will see the password of your device displayed in red after which you will simply need to power on your device and insert the password.
As you can see in our example, the password is 1987!!!
- [message]
- ##lightbulb-o## Note this tip before you go!!
- If your Tecno T528 happens to have a password set for settings, contacts, media storage, you can format using the code *#0*#.
COMMENTS