OnePlus 6 OxygenOS updates, OnePlus 6T OxygenOS updates, OnePlus 6 updates, OnePlus Firmware, OxygenOS: Looking for the update of your OnePlus 6 or 6T? On this page, we have made available the download links for the different version of the OnePlus 6 and OnePlus 6T OxygenOS firmware which is the official release.
Similar articles
Looking for the update of your OnePlus 6 or 6T? On this page, we have made available the download links for the different version of the OnePlus 6 and OnePlus 6T OxygenOS firmware which is the official release.
There are two release channels for OxygenOS software updates. One is the standard which is referred to as stable, while the other is Open Beta. We also have a post on the different updates for the Open Beta roms for both the OnePlus 6 and Oneplus 6T.
OnePlus 6 and OnePlus 6T, what's the difference?
The OnePlus 6 and 6T are not the same devices in both firmware and other hardware aspects. Here are some key features of both devices you should consider taking a look at.
OnePlus 6:
The OnePlus 6 is all-glass and contains 6 or 8 GB of RAM, the Snapdragon 845 and a choice of 64, 128 or 256 GB of UFS 2.1 storage. It features a slightly larger (when compared to the OnePlus 5T) AMOLED 2280 x 1080 display with a cutout at the top for the front camera, sensors, earpiece, and notification LED. The OnePlus 6 uses 2.5D Corning Gorilla Glass 5 as a cover glass and supports Bluetooth 5.0 and NFC.
The OnePlus 6 has two rear-facing cameras. The primary one uses the Sony IMX 519 sensor with OIS while the secondary camera uses the Sony IMX 376K sensor for a bokeh effect in portrait mode.
The phone has been specified to be dust, splash, and water resistant, however, it has not been certified with an IP Code and OnePlus suggests against submerging the device. Water damage is not covered by the warranty.
The phone has an Alert slider on the right side with 3 notification profiles: Silent, Vibrate and Ring.
The phone has four colour variants: Mirror Black, Midnight Black, Silk White, and Red.
The OnePlus 6 launched with Android 8.1 installed and uses the OxygenOS interface. The option to take part in the Android Pie beta was available from launch. The first stable version of OxygenOS 9.0 based on Android Pie was released on September 21, 2018. It comes in two different variants based on your region — A6000 which available in India, China and Asia, and the A6003 which is available in North America and Europe.
The OnePlus 6T is an incremental hardware update to the OnePlus 6, removing the 3.5 mm audio jack, making the notch at the top of the screen into a smaller "teardrop" size, and providing an on-screen fingerprint sensor.
The OnePlus 6T comes with a 6.41-inch AMOLED FHD+ display, a Snapdragon 845 processor, and a 3700 mAh battery (larger than its predecessor). It has a 16-megapixel and a 20-megapixel camera on the back, and another 16-megapixel one in the front. This device comes with different variations of storage (128 GB, 256GB) and RAM.
For biometrics, the OnePlus 6T has an in-display fingerprint sensor, in addition to Face Unlock.
The OnePlus 6T supports 4G, LTE, Dual VoLTE, 3G, 2G and CDMA, and Comes with Android Pie, and not to forget the Custom UI which is the OxygenOS
The OnePlus 6T comes with a 6.41-inch AMOLED FHD+ display, a Snapdragon 845 processor, and a 3700 mAh battery (larger than its predecessor). It has a 16-megapixel and a 20-megapixel camera on the back, and another 16-megapixel one in the front. This device comes with different variations of storage (128 GB, 256GB) and RAM.
For biometrics, the OnePlus 6T has an in-display fingerprint sensor, in addition to Face Unlock.
The OnePlus 6T supports 4G, LTE, Dual VoLTE, 3G, 2G and CDMA, and Comes with Android Pie, and not to forget the Custom UI which is the OxygenOS
- [message]
- ##shop## Want to buy?
OnePlus 6 and 6T OxygenOS download links
- [message]
- ##book## Read Also:
| Date | OxygenOS Stable Version | Download for OnePlus 6 |
| 23 May 2018 | OxygenOS 5.1.3 | Download |
| 24 May 2018 | OxygenOS 5.1.5 | Download |
| 9 Jun 2018 | OxygenOS 5.1.6 | Download |
| 14 Jun 2018 | OxygenOS 5.1.7 | Download |
| 20 Jul 2018 | OxygenOS 5.1.9 | Download |
| 15 Aug 2018 | OxygenOS 5.1.11 | Download |
| 15 Sep 2018 | OxygenOS 9.0 | Download |
| 1 Oct 2018 | OxygenOS 9.0.1 | Download |
| 1 Nov 2018 | OxygenOS 9.0.2 | Download |
| 29 Dec 2019 | OxygenOS 9.0.3 | Download |
| 12 Feb 2019 | OxygenOS 9.0.4 | Download |
| 21 Apr 2019 | OxygenOS 9.0.5 | Download |
| Date | OxygenOS Stable Version | Download for OnePlus 6T |
| 21 Nov 2018 | OxygenOS 9.0.6 | Download |
| 3 Dec 2018 | OxygenOS 9.0.7 | Download |
| 20 Dec 2018 | OxygenOS 9.0.11 | Download |
| 21 Feb 2019 | OxygenOS 9.0.12 | Download |
| 20 Apr 2019 | OxygenOS 9.0.13 | Download |
How to install the update
- Plug your phone into your computer and copy the downloaded .zip to your phone’s storage. If you’re using a Mac, you can install Android File Transfer for this operation.
- After the .zip file is copied to your phone, go to Settings > System update, click the Settings icon on the top right corner, choose Local upgrade, find the .zip file and click on Install' to confirm.
- The update takes about a minute (depending upon the file size), once done reboot your device to boot into the latest Oxygen OS.
COMMENTS