Download Tecno Camon 12( Tecno CC7 ) Secure Boot DA auth file

Download Tecno Camon 12( Tecno CC7 ) Secure Boot DA auth file from this page. Secure Boot DA files are very useful when it comes to repairing most recent MTK-based devices. The secure boot file comes in handy when you are to flash new stock firmware(since the default DA file from the flash tool may not work for all devices), bypass other securities.

Similar articles

Download Tecno Camon 12( Tecno CC7 ) Secure Boot DA auth file from this page. Secure Boot DA files are very useful when it comes to repairing most recent MTK-based devices. The secure boot file comes in handy when you are to flash new stock firmware(since the default DA file from the flash tool may not work for all devices), bypass other securities.

You won't always require this file when flashing or unlocking an MTK device. The Secure Boot Auth file for Tecno Camon 12 will help solve problems like authentication error, or buffer errors when you use flash tools like SP Flash Tool, Miracle Box or NCK Pro Box/NCK Dongle Android MTK.

Tecno Camon 12(Tecno CC7) Key specs

➩ Display:  6.52 inch IPS Infinity-V Display, 720 x 1600 pixels, 20:9 aspect ratio (~269 PPI density)
➩ 4G Network Support: Yes
➩ OS: Android 9.0 (Pie); HIOS 5.5
➩ Processor: Octa-core Mediatek MT6762 Helio P22 (12 nm)
➩ Memory: 4GB RAM + 64GB ROM
➩ Rear Camera: 16MP + 8MP + 2MP Camera
➩ Front Camera: 16 MP Camera, Dual LED Flash, AI Mode, AR Mode
➩ Sim Slots: Dual Nano SIM Card+1 SD Card
➩ Fingerprint sensor: Yes + Face ID
➩ Battery: 4000 mAh

The uses of the Custom Secure Download Agent file

• Helps flash a new stock firmware
• Perform system backup using tools like SP Flash tool
• Bypass Factory Reset Protection(FRP)
• Read security codes of an MTK device
• Clone a Recovery Image or boot files

Requirements to use this file

1. A Computer is required in order to use this file
2. You will need to have MTK drivers installed on your computer
3. A USB cord
4. Android MTK flash tool like SP Flash tool or Miracle Box.

Using the custom DA file

You can use this file for with different MTK flash tools. Common tools include SP Flash Tool, NCK Android MTK Dongle, MTK CM2, Miracle Box.

1:Using NCK Android MTK Dongle

• Launch MTK NCK Dongle from your computer
• Go to Settings
• Next, click on "Load custom loader"
• Navigate to where you download and saved the Tecno Camon 12 DA file and select it.
• Now head back to the services tab or Unlock to perform whatever operation you wanted to carry out using the DA file.

• [message]
• ##book## Further Reading
• An example of how to use custom DA File to bypass Tecno Pop 2 FRP

2: Using Miracle Box

• Launch Miracle Box. By default, it will be on the MTK option.
• Navigate to "Custom Settings".

• Now, click on DA File, navigate to where you saved it and load it.

• After you've loaded the DA file, make sure you check the box beside it.

• After this, you can now use it to perform the system repair or fixes you wished to carry out.

[post_ads_2]

3: Using the SP Flash tool

1. Launch SP flash tool
2. Click on the "Download" tab
3. You will now see a custom DA file already loaded. 
4. If you can't flash with it, click on the option to select custom DA file
5. Navigate to where you saved the Tecno CC7 Custom secure bot DA file and load it.
6. Now you can proceed with the flashing or FRP bypass.

Download Tecno Camon 12 Secure Boot DA auth File

The file you are about to download contains the DA file and also the Authentication file for Tecno Camon 12.

[##download## Tecno Camon 12 DA + Auth file]