From this page, you will be able to download Tecno Spark 2(KA7) stock rom/firmware file and use it to fix system issues on your device. Tecno Spark 2 is an MT6580 Mediatek smartphone running on Android Oreo. The stock firmware files provided below are in the scatter.txt format and can be flashed using SP flash tool.
Similar articles
From this page, you will be able to download Tecno Spark 2(KA7) stock rom/firmware file and use it to fix system issues on your device. Tecno Spark 2 is an MT6580 Mediatek smartphone running on Android Oreo. The stock firmware files provided below are in the scatter.txt format and can be flashed using SP flash tool.
This stock rom can fix issues like; frp lock, forgotten pin/pattern/passcode. Below you will find firmware files for different Tecno Spark 2 buildS. Make sure to download the one which corresponds to your device build before flashing.
What to take note
- After flashing stock firmware, your Tecno Spark 2 device may become completely dead. This is especially when you flash the wrong firmware build. So, make sure to download the correct one.
- Take a backup of your current system before flashing a new one.
- Make sure you have drivers installed properly on your computer in order for the flash tool to detect your device.
- Another important thing to note is the nulled/invalid IMEI. This a times arise when you perform a format all + download using SP flash tool. You can always repair invalid IMEI by following guides from here.
- After flashing stock firmware, your Tecno Spark 2 device may become completely dead. This is especially when you flash the wrong firmware build. So, make sure to download the correct one.
- Take a backup of your current system before flashing a new one.
- Make sure you have drivers installed properly on your computer in order for the flash tool to detect your device.
- Another important thing to note is the nulled/invalid IMEI. This a times arise when you perform a format all + download using SP flash tool. You can always repair invalid IMEI by following guides from here.
Flashing requirements
- A Computer
- Android MTK USB drivers
- A USB cable
- Sp flash tool
- A Computer
- Android MTK USB drivers
- A USB cable
- Sp flash tool
How to flash: A quick guide
- Make sure you have drivers installed.
- Power off the phone, remove and reinsert the battery,
- Download and extract firmware for your build from the link below,
- Download sp flash tool and launch, then load firmware from the directory you extracted,
- Once the firmware is loaded, click the download button and connect the phone to PC via USB;
- Wait for flashing to complete
- Make sure you have drivers installed.
- Power off the phone, remove and reinsert the battery,
- Download and extract firmware for your build from the link below,
- Download sp flash tool and launch, then load firmware from the directory you extracted,
- Once the firmware is loaded, click the download button and connect the phone to PC via USB;
- Wait for flashing to complete
COMMENTS