Download Tecno Spark Pro K8 Stock ROM/Firmware file from this page. The firmware file you are about to download is in the scatter.txt format and is flashable with SP flash tool. With this firmware file, you can flash and fix bootloop errors, bypass frp lock, remove privacy lock and repair nulled/invalid IMEI.
Similar articles
Download Tecno Spark Pro K8 Stock ROM/Firmware file from this page. The firmware file you are about to download is in the scatter.txt format and is flashable with SP flash tool. With this firmware file, you can flash and fix bootloop errors, bypass frp lock, remove privacy lock and repair nulled/invalid IMEI.
While downloading the stock firmware for your Tecno Spark Pro K8 below, make sure to download the build which corresponds to that of your device.
Tecno Spark Pro K8 core features
- Display: 5.5 inch 720 x 1280 pixels HD display.
- Camera: 13-megapixel Main/5-megapixel front.
- Storage: 16 GB of internal storage.
- RAM: 1/2 GB of RAM.
- CPU: Quad-core 1.3 GHz Cortex-A53, Mediatek MT6737.
- OS: Android 7.0 (Nougat)
Requirements to flash this firmware file
- Android MTK USBVCOM Drivers
- SP Flash tool
- A Computer
- A USB cord
How to flash Tecno Spark Pro K8
- Download The stock firmware into your computer and extract it.
- Download SP Flash tool and extract. Also, make sure you have downloaded and installed MTK drivers.
- Now, launch the SP flash tool and load firmware scatter.
- Power off your device, click the download button on the SP flash tool and connect your Tecno Spark Air KC1j.
- The flashing will then start. wait for a couple of minutes and you will see an "OK" when the flashing is completed.
Download Tecno Spark Pro K8 firmware files
Download different builds of Tecno Spark Pro K8 firmware/stock rom from below.
COMMENTS