QMobile Z8 Download QMobile Z8 stock firmware file from the link below and repair your bricked QMobile Z8 device. You can equally use this f...
Similar articles
 |
| QMobile Z8 |
The QMobile Z8 was released in 2015 with Android KitKat as Android version. It comes with 2GB of RAM and an internal memory of 16GB with a snapdragon 410 CPU.
Requirements to flash this firmware
- A computer
- A USB cord
- QFIL
How to flash
- Download and extract QMobile Z8 Firmware on your PC and unzip it with any unzip utility download link can be found below.
- Download and install Qualcomm Usb Drivers.
- Download Qualcomm Flasher QPST_2.7.422.7z
- Open QPST installation folder C:\Program Files\Qualcomm\QPST\bin
- In the bin folder, you will find QFIL.exe open it and continue.
- Make sure you installed Qualcomm drivers correctly.
- Press and hold the vol - and Vol + keys and connect your phone to the PC via USB
- You will see Qualcomm HS-USB QDloader 9008 port in you PC device manager.
- Select Qualcomm port if QFIL does not pick automatically.
- Press “Browse” button and select prog_emmc_firehose_8916.mbn in QMobile Z8 Firmware folder.
- Then Press “Load XML ” and select rawprogram_unsparse.xml if you want to install clean software on your cellphone. if you want to upgrade only then you should select rawprogram_unsparse_upgrade.xml file. but we recommend that you should install clean software because sometimes upgrade makes problems.
- After selecting rawprogram_unsparse.xml you will be asked to select patch0.xml please select and continue.
- Connect Qualcomm Phone to your PC via USB cable by holding Vol- and Vol+ keys and select Qualcomm port in port selection.
- Press the “Download” button and let it complete phone restart automatically after download complete.
COMMENTS