Official Stock Firmware for Itel A51 can be found here. Download Itel A51 stock firmware/ROM and use it to re-install your device operating system. If your Itel A51 is bricked(stuck on boot) this firmware will help you restore the system.
Similar articles
Official Stock Firmware for Itel A51 can be found here. Download Itel A51 stock firmware/ROM and use it to re-install your device operating system. If your Itel A51 is bricked(stuck on boot) this firmware will help you restore the system.
Also, this firmware can be used to bypass FRP lock on the Itel A51, as well as remove the forgotten pattern, passcode or PIN,
Itel A51 features 1.3GHZ Quad-core, 4X cortex A7 Processor, 16GB internal storage, which can be expanded to 32GB with SD support, plus 1GB RAM and will run latest Google Android 6.0 marshmallow pre-installed out of the box. Check below for some of it's core specs.
Itel A51 Core Specifications
- Model: Itel A51
- GSM: GSM 900 / 1800
- 3G: HSDPA 900 / 2100
- SIM Type: Dual micro-SIM
- OS: Android 6.1 Marshmallow
- Body Dimensions: 145.50 x 72.78 x 9.4
- Display Size/Type: 5.5-inch IPS display
- Processor: Quad-Core 1.2 GHz, Cortex A7
- CPU: Spreadtrum
- Graphics Processor: Mali-400 MP2
- RAM: 1 GB
- Internal Storage: 16 GB
- External Storage: MicroSD card up to 32 GB
- Primary Camera: 5-megapixel autofocus camera with LED flash
- Video recording: Yes
- Secondary Camera: 2-megapixel camera
- FM Radio: Yes
- Bluetooth: v4.0
- WiFi: Wi-Fi 802.11 b/g/n, Wi-Fi Direct, hotspot
- GPS: Yes
- USB: MicroUSB v2.0
- Battery: Removable 2,700 mAh
Requirements to flash Itel A51
Just like any other SPD Android device, you will be needing the following in order to flash your Itel A51;
- A computer
- Android SPD drivers
- SPD Flash tools like ReserachDownload or UpgradeDownload
- A USB cord
- And of course the stock firmware.
How to flash SPD Androids with ReasearchDownload Tool
- Power off your Itel A51
- Install SPD drivers on your computer
- Download and extract the ResearchDownload Tool and the firmware file.
- Launch the Research Tool and load the firmware .pac file.
- Click the start button on ResearchDownload Tool and then press and hold the boot key(volume up/down) on your Itel A51 and connect it to the computer
- Flashing will then start. Sit tight and wait for the flashing process to complete.
The full guide plus screenshots can be found here.
COMMENTS