Download from below the stock firmware for your ITEL P41. Firmware is a packet file and can be flashed with SPD UpgradeDownload tool.
Similar articles
Itel PowerPro P41 smartphone was launched in August 2017. The phone comes with a 5.00-inch touchscreen display with a resolution of 480 pixels by 854 pixels. Itel PowerPro P41 price in India starts from Rs. 5,777.
The Itel PowerPro P41 is powered by 1.3GHz quad-core processor and it comes with 1GB of RAM. The phone packs 8GB of internal storage that can be expanded up to 32GB via a microSD card. As far as the cameras are concerned, the Itel PowerPro P41 packs a 5-megapixel primary camera on the rear and a 2-megapixel front shooter for selfies.
The Itel PowerPro P41 is powered by a 5000mAh non-removable battery.
The Itel PowerPro P41 is a single sim smartphone. Connectivity options include Wi-Fi, GPS, Bluetooth, FM and 4G (with support for Band 40 used by some LTE networks in India).
Download from below the stock firmware for your ITEL P41. Firmware is a packet file and can be flashed with SPD UpgradeDownload tool.
FLASHING REQUIREMENTS
In order to flash any Spreadtrum Android device, you should have in your possession the following programs/tools,
- A computer with Android spd USB drivers installed. You can download them from here
- A USB cable
- SPD flash tools like ResearchUpgrade or Miracle box. Download from here
- The firmware of the spd device to be flashed
FLASHING GUIDE
- Extracted downloaded stock firmware file
- Extract and run spd flash tool
- From the dashboard of the flash tool, locate and load spd packet firmware file
- After the firmware has been loaded in the flash tool, click on the play icon to start the flashing process
- Now remove phone battery, reinsert and then press and hold the boot key(volume down or volume up depending on the device) and connect the phone to pc via USB.
- The flashing process should start. Just sit still and wait for it to complete.
- [*] See full guide with screen captures here
COMMENTS