Download Hotwav Venux R9 stock rom/firmware from this page. The stock firmware file you are to download is in the.pac format and can be flashed using SPD flash tools like Miracle Box, SPD Research Tool, SPD Upgrade tool, etc.
Similar articles
Download Hotwav Venux R9 stock rom/firmware from this page. The stock firmware file you are to download is in the.pac format and can be flashed using SPD flash tools like Miracle Box, SPD Research Tool, SPD Upgrade tool, etc.
This stock firmware file will help you bypass forgotten pattern lock, password, fix bootloop issues and as well nulled IMEI and other system issues.
Note:
- Although we have tested this firmware file before sharing, consider taking backup of your device before flashing it.
- If after flashing you get "encryption unsuccessful" after powering on the device, simply perform a hard reset to fix it.
- SPD drivers must be installed on your PC in order to flash this firmware.
Requirements
- ResearchUpgrade Tool
- SPD drivers
- A Computer
- A USB Cord
How to flash
- Install Spreadtrum Drivers.
- Install the SPD Download Tool.
- Open the Research download tool > bin folder.
- Launch ResearchDownload.exe.
- Click on the Load Packet icon (top left corner).
- In the window that pops up, navigate to the location of the Hotwav Venus R9 firmware.pac file, select it then click Open.
- The PAC file should now be loaded (its name should appear at the top).
- Click the Settings Icon (top left corner).
- In the box that pops up, untick any item(s) you do not wish to flash then click OK. Ignore this step if you wish to flash all files.
- Click the Start downloading button.
- You should see Waiting…. under the Progress bar.
- Switch off the phone (still with battery inside) then connect it to the PC via USB cord (note that you might need to hold the volume decrease button while connecting to PC on some phones) and flashing should begin. DO NOT interrupt.
COMMENTS