Download Tecno Spark 4 Lite BB4k stock rom/firmware file

Download Tecno Spark 4 Lite BB4K stock ROM/firmware, Tecno bb4k flash file, Tecno bb4k 32+2v flash file from here and use it to fix them.

Similar articles

Download Tecno Spark 4 Lite BB4K stock ROM/firmware, Tecno bb4k flash file, Tecno bb4k 32+2v flash file from here and use it to fix them.

The firmware file here will help your fix system-related issues like FRP bypass, bootloop fix, fixing of nulled/invalid IEMEI as well as unknown baseband, remove pattern lock and just to name a few.

The Tecno Spark 4 Lite Run on android 9.0, has 4GB of RAM and 64GB of Internal Memory  & is Powered by Mediatek MT6761 Processor. The Dual-SIM (GSM) Android Smartphone has support for Nano-SIM Card.

In terms of connectivity, it includes Wi-Fi, GPS, Bluetooth, USB OTG, FM, 3G. Also, the 6.52" display Tecno Spark 4 Lite comes with a Quad-core 1.8 GHz Cortex-A53 CPU and an 8 MP, f/2.0 single Camera.

Requirements to flash this firmware file

1. Android MTK USBVCOM Drivers
2. SP Flash tool 
3. A Computer
4. A USB cord

Tecno Spark 4 Lite BB4K Core specifications

• Colours: Purple, Blue, Black
• SIM Count: Dual Sim
• SIM Type: Nano Sim
• 2G: Yes
• 3G: Yes
• 4G: Yes
• Platform: Android 9.0 Pie (HiOS 5.0)
• Chipset: Mediatek MT6761 Helio A22 (12 nm)
• Processor: 4x 2.0 GHz ARM Cortez-A53 & 4x 1.8 GHz ARM Cortez-A53
• Cores: Octa-core
• GPU: PowerVR GE8320
• RAM: 2 GB
• ROM: 32 GB
• Memory Card Support: Yes
• Body Dimension: 75.8 x 166.7 x 8.4 mm
• Display: 6.52 inches, AMOLED, 720 x 1600 pixels
• Rear Camera: 8 MP with Led
• Front Camera: 8 MP with Led
• WLAN: Wi-Fi 802.11 a/b/g/n/ac
• Wi-Fi Hotspot: Yes
• Bluetooth: Yes, 5.0 with A2DP with LE
• Sensors: Proximity, Accelerometer, Fingerprint, Light
• Battery: 4000 mAh Li-Polymer (non-removable)
• Other features: OTG

How to flash

• Download The stock firmware into your computer and extract it.
• Download SP Flash tool and extract. Also, make sure you have downloaded and installed MTK drivers.
• Now, launch the SP flash tool and load firmware scatter.
• Power off your device, click the download button on the SP flash tool and connect your Tecno Spark 4 Lite BB4K.
• The flashing will then start. wait for a couple of minutes and you will see an "OK" when the flashing is completed.

[##cogs## Check out the full flashing guide here]

Download Tecno Spark 4 Lite BB4K firmware/ROM

[##cogs## BB4k-H6114UVW-PGo-200112V66]

[##cogs## BB4k-H6114UVW-PGo-TR-191201V35]