Tecno Spark 5 Air (KD6) DA bin file

Download Tecno Spark 5 Air DA bin file from here. The secure boot Download Agent file for Tecno Spark 5Air will come in handy in many different scena

Similar articles

 Download Tecno Spark 5 Air DA bin file from here. The secure boot Download Agent file for Tecno Spark 5Air will come in handy in many different scenarios, especially fishing or bypassing frp protection;

Tecno Spark 5 Air smartphone runs on Android v10 (Q) operating system. The phone is powered by Octa-core, 2 GHz, Cortex A53 processor. It runs on the MediaTek Helio A22 Chipset. It has 2 GB RAM and 32 GB internal storage.

Tecno Spark 5 Air smartphone has an IPS LCD display. It measures 174.67 mm x 79.27 mm x 9.05 mm. The screen has a resolution of 720 x 1640 pixels and 256 ppi pixel density. On the camera front, the buyers get an 8 MP f/2.0 Primary Camera and on the rear, there's a 13 MP camera with features like Digital Zoom, Auto Flash, Face detection, Touch to focus. It is backed by a 5000 mAh battery. Connectivity features in the smartphone include WiFi, Bluetooth, GPS, Volte, and more.

Requirements to use this DA file

• An MTK flash tool like SP flash tool, NCK Box or dongle, Miracle CM2 MTK, Miracle Box, etc.
• Android MTK USBVCOM drivers
• A USB cord
• A computer

Using the DA file

You can import and use this DA file with SP flash tool any other MTK flash tool like NCK Dongle. If you are using NCK dongle, then  proceed thus;

• Download NCK dongle from the link below.

[##download##  Download NCK dongle crack]

• Next, extract and launch the loader of NCK dongle.
• Once it opens, click on the setting tab and load Tecno POP 1 custom DA file from where you extracted.

loading Tecno KD6 DA file on NCK dongle

• After loading the DA file, head back to the services tab and click on Reset FRP.

Click on reset FRP under services

• At this point after clicking on the "Reset FRP" button, power off your device and connect to the computer via USB.

Power off the device and connect to the Computer

• Now with the drivers installed, and your charging circuit working perfectly, NCK dongle should be able to detect your device
• The bypassing process will take only a couple of seconds.
• Once done with the bypassing, you should have a screen like the one below.

Tecno KD6 frp reset done

😌 😌 ☺️ After following all the above steps, you must have successfully reset FRP on your Tecno KD6

Tecno Spark 5 Air KD6 DA File 

[##download## Download]