Transsion Software Download Tool v5.1912.05.17 - Tecno Flash tool/SWD Tool

Download from the link below Transsion Software Download Tool - Tecno Flash tool/SWD Tool v5.1912.05.17. This is one of the best Flash tools which

Similar articles

 Download from the link below Transsion Software Download Tool - Tecno Flash tool/SWD Tool  v5.1912.05.17. This is one of the best Flash tools which allows you to flash booth MTK scatter.txt, .pac and XML firmware files.

By using this flash tool, you can save yourself the stress of always looking for secure boot DA files when flashing certain Android MTK devices.

The tool is developed by Transsion Holding and is best suited for After-Sale Services.

Here, we have provided the download link for Transsion Software Download Tool plus a how to use guide.

Transsion Software Download Tool

This Flash tool helps you restore the stock firmware of your Android MTK, SPD and Qualcomm Android device. You can therefore fix issues like Bootloop, Dead boot, FRP, etc.

Usage Requirements

• A Windows computer
• MTK, SPD or Qualcomm drivers. Download from here.
• A USB cord
• And of course your device stock rom.

How to Flash with Transsion Software Download Tool 

Before you proceed, it should be noted that flashing your device will erase all your personal data. It might be wiser to always take a backup of your device before proceeding with flashing a new stock ROM.

To flash your Android MTK? SPD or Qualcomm using the Trannsion Software Download Tool, proceed as follows;

Step 1: Download required files

Start by downloading all the required files. That is the drivers for your device, the stock firmware and of course the SoftwareDownoad Tool.

Step 2: Extract files and install drivers

Once you've downloaded all the required files, extract them and install the drivers.

Step 3: Launch Software Download Tool & import firmware

Now, after installing the drivers, navigate to where you extracted the Software Download Tool and launch the Setup. Once it opens, click on the Gear icon and load the firmware files by navigating to the directory where you extracted it. After selecting the firmware PAC file, Scatter.txt or XML file, click on the confirm button.

Step 4: Start the flashing

To begin with, the flashing, click on the "Start" button on the Software Download Tool dashboard. It will process the firmware files and load all the different partitions. Next, power off your Android device. And finally, press and hold the volume down or volume up key and connect the phone to the computer via USB;

The flashing will then begin. What until it finishes.

Step 5: Unplug phone

Once the flashing is done, you will get a passed message and you can now unplug your device from the computer. You can then take off the battery and reinsert it then power on your device. You won't have to remove the battery is it is an internal built-in battery.

Tool Download link

[##download## Download]