Download Tecno F4 Pro Stock ROM/Firmware files and fix system errors like a boot loop. The provided firmware files on this page can be flashed using
Similar articles
The firmware files provided below are only for tecno F4 Pro. Also, make sure you download the correct build for your device. After downloading the firmware file, follow the flashing guide provided below to flash the stock rom and repair your device.
What to take note
- After flashing stock firmware, your device may become completely dead. This is especially when you flash the wrong firmware build. So, make sure to download the correct one.
- Take a backup of your current system before flashing a new one.
- Make sure you have drivers installed properly on your computer in order for the flash tool to detect your device.
- Another important thing to note is the nulled/invalid IMEI. This a times arise when you perform a format all + download using SP flash tool. You can always repair invalid IMEI by following guides from here.
Flashing requirements
- A Computer
- Android MTK USB drivers
- A USB cable
- Sp flash tool
How to flash: A quick guide
- Make sure you have drivers installed.
- Power off the phone, remove and reinsert the battery,
- Download and extract firmware for your build from the link below,
- Download sp flash tool and launch, then load firmware from the directory you extracted,
- Once the firmware is loaded, click the download button and connect the phone to PC via USB;
- Wait for flashing to complete
COMMENTS