You can download the official Srock ROM/firmware file for the Tecno Camon 16 (CE7) from here and use it to fix all system-related issues, like...
You can download the official Srock ROM/firmware file for the Tecno Camon 16 (CE7) from here and use it to fix all system-related issues, like bootloop, invalid IMEI, privacy lock, etc.
This stock firmware is in the scatter.txt format and can be flashed with the SP FLash tool or Miracle Box.
Tecno Camon 16 smartphone was launched on 10th October 2020. The phone comes with a 6.80-inch touchscreen display. It comes with 4GB of RAM. The Tecno Camon 16 runs Android 10 and is powered by a 500mAh battery. The Tecno Camon 16 supports proprietary fast charging.
As far as the cameras are concerned, the Tecno Camon 16 on the rear packs a 64-megapixel primary camera; a 2-megapixel camera, and a 2-megapixel camera. It sports a 16-megapixel camera on the front for selfies.
The Tecno Camon 16 runs HiOS 7.0 is based on Android 10 and packs 64GB of inbuilt storage. It was launched in Cloud White and Purist Blue colour.
Connectivity options on the Tecno Camon 16 include Wi-Fi 802.11 a/b/g/n, GPS, and Bluetooth v5.00. Sensors on the phone include an ambient light sensor, compass/ magnetometer, proximity sensor, and fingerprint sensor.
What to take note
- After flashing stock firmware, your device may become completely dead. This is especially when you flash the wrong firmware build. So, make sure to download the correct one.
- Take a backup of your current system before flashing a new one.
- Make sure you have drivers installed properly on your computer in order for the flash tool to detect your device.
- Another important thing to note is the nulled/invalid IMEI. This a times arise when you perform a format all + download using SP flash tool. You can always repair invalid IMEI by following guides from here.
Flashing requirements
- A Computer
- Android MTK USB drivers
- A USB cable
- Sp flash tool
How to flash: A quick guide
- Make sure you have drivers installed.
- Power off the phone, remove and reinsert the battery,
- Download and extract firmware for your build from the link below,
- Download sp flash tool and launch, then load firmware from the directory you extracted,
- Once the firmware is loaded, click the download button and connect the phone to PC via USB;
- Wait for flashing to complete
COMMENTS