Download Tecno CE7 / CE7j DA File (Camon 16) - MTK Secure Boot Auth File

Download Tecno CE7 / CE7j DA File (Camon 16) - MTK Secure Boot Auth File and use it to bypass FRP or when a secure boot file is required during flashi

Similar articles

Download Tecno CE7 / CE7j DA File (Camon 16) - MTK Secure Boot Auth File and use it to bypass FRP or when a secure boot file is required during flashing.

Tecno Camon 16 smartphone was launched on 10th October 2020. The phone comes with a 6.80-inch touchscreen display. It comes with 4GB of RAM. The Tecno Camon 16 runs Android 10 and is powered by a 500mAh battery. The Tecno Camon 16 supports proprietary fast charging.

As far as the cameras are concerned, the Tecno Camon 16 on the rear packs a 64-megapixel primary camera; a 2-megapixel camera, and a 2-megapixel camera. It sports a 16-megapixel camera on the front for selfies.

The Tecno Camon 16 runs HiOS 7.0 is based on Android 10 and packs 64GB of inbuilt storage. It was launched in Cloud White and Purist Blue colour.

Connectivity options on the Tecno Camon 16 include Wi-Fi 802.11 a/b/g/n, GPS, and Bluetooth v5.00. Sensors on the phone include an ambient light sensor, compass/ magnetometer, proximity sensor, and fingerprint sensor.

Tecno CE7/CE7j Core features

• Network: 2G, 3G, 4G
• Dimension: 170.9 x 77.2 x 9.2
• Weight: 207
• SIM: Dual SIM
• Display: IPS LCD
• Screen size: 6.8"
• Screen Resolution: 720 x 1640
• OS: Android 10
• Chipset: Mediatek Helio G70 MT6768
• CPU: Octa-core (2x2.0 GHz Cortex-A75 & 6x1.7 GHz Cortex-A55)
• GPU: Mali-G52 2EEMC2
• RAM: 4GB
• ROM: 64GB
• Battery: 5000 mAh
• Fingerprint: Rear-mounted

Requirements to use this DA file

• An MTK flash tool like SP flash tool, NCK Box or dongle, Miracle CM2 MTK, Miracle Box, etc.
• Android MTK USBVCOM drivers
• A USB cord
• A computer

Using the DA file

You can import and use this DA file with SP flash tool any other MTK flash tool like NCK Dongle. If you are using the NCK dongle, then  proceed thus;

• Download the NCK dongle from the link below.

[##download##  Download NCK dongle crack]

• Next, extract and launch the loader of the NCK dongle.
• Once it opens, click on the setting tab and load Tecno CE7 custom DA file from where you extracted it.

loading TecnoCE7/CE7j DA file on NCK dongle

• After loading the DA file, head back to the services tab and click on Reset FRP.

Click on reset FRP under services

• At this point after clicking on the "Reset FRP" button, power off your device and connect to the computer via USB.

Power off the device and connect to the Computer

• Now with the drivers installed, and your charging circuit working perfectly, the NCK dongle should be able to detect your device
• The bypassing process will take only a couple of seconds.
• Once done with the bypassing, you should have a screen like the one below.

Tecno CE7:CE7j frp reset done

😌 😌 ☺️ After following all the above steps, you must have successfully reset FRP on your Tecno CE7/CE7j

Tecno CE7 / CE7j DA File (Camon 16) link

[##download## Download DA File]