Download Tecno Pova LD7 DA File | MTK Secure Auth File

Download Tecno Pova LD7 DA File | MTK Secure Auth File free from this page. This custom Download Agent file will be of use when flashing your Tecno P

Similar articles

Download Tecno Pova LD7 DA File | MTK Secure Auth File free from this page. This custom Download Agent file will be of use when flashing your Tecno Pova LD7 or when bypassing FRP. 

Most recent MTK Android devices now cannot be flashed using your MTK Tool's default DA bin file. So, getting the appropriate DA file made especially for your device is necessary.

Tecno Pova key specs

• CPU: MediaTek MT6768 Chipset
• Display: 6.8-inch HD+ Dot-in Display, 1640 x 720
• Processor: 2GHz Octa-core MediaTek Helio G80
• RAM: 6GB RAM
• Storage: 64GB Storage, MicroSD up to 256GB
• Rear Camera: 13MP Main + 2MP + 2MP + AI HD Lens, Quad Cameras
• Front Camera: 8MP Selfie Camera, Dual Flash
• Network: 4G LTE
• Connectivity: Wi-Fi, Bluetooth, GPS
• Others: Fingerprint Scanner, OTG, MicroUSB Port
• OS: HiOS, Android 10
• Battery: 6,000mAh Battery, 18W Flash Charge

Requirements to use this DA file

• An MTK flash tool like SP flash tool, NCK Box or dongle, Miracle CM2 MTK, Miracle Box, etc.
• Android MTK USBVCOM drivers
• A USB cord
• A computer

Using the DA file

You can import and use this DA file with SP flash tool any other MTK flash tool like NCK Dongle. If you are using the NCK dongle, then  proceed thus;

• Download the NCK dongle from the link below.

[##download##  Download NCK dongle crack]

• Next, extract and launch the loader of the NCK dongle.
• Once it opens, click on the setting tab and load the Tecno Pova LD7 custom DA file from where you extracted it.

loading Tecno ld7DA file on NCK dongle

• After loading the DA file, head back to the services tab and click on Reset FRP.

Click on reset FRP under services

• At this point after clicking on the "Reset FRP" button, power off your device and connect to the computer via USB.

Power off the device and connect to the Computer

• Now with the drivers installed, and your charging circuit working perfectly, the NCK dongle should be able to detect your device
• The bypassing process will take only a couple of seconds.
• Once done with the bypassing, you should have a screen like the one below.

Tecno Pova frp reset done

After following all the above steps, you must have successfully reset FRP on your Tecno Pova

Tecno Pova LD7 DA File 

[##download## Download]