Download Itel A33 Stock ROM / Firmware flash file. This Itel A33 PAC firmware file can be used to fix all system-related issues like bootloop, unknown
Similar articles
Download Itel A33 Stock ROM / Firmware flash file. This Itel A33 PAC firmware file can be used to fix all system-related issues like bootloop, unknown IMEI, remove FRP and privacy lock, etc.
This SPD Android device features a 5-inch display with a screen resolution of 480 x 854 pixels and runs on Android v8.1 (Oreo: Go Edition).
The Itel A33 is powered by a Quad-core, 1.3 GHz SPD SC7731 processor paired with 1 GB of RAM and an expandable 8GB internal storage. Also, it features a 5 MP main camera and a 2 MP front-facing shooter, with a single LED flash on both sides. You get a 2200 mAh battery, support for dual 3G SIMs, Bluetooth 4.0 and the aforementioned Android 8.1 (Oreo, Go Edition).
How to install the Itel A33 Stock firmware
Requirements:
- Android SPD Drivers
- A USB Cord
- SPD Flash Tool like Research Download tool
- A Computer
Note:
Before flashing,
- The battery needs to be well charged
- The phone is powered off / switched off
- You have installed Spreadtrum SCI USB drivers
Flashing steps
To flash and spd device after you have installed drivers on your computer, proceed as follows;
- Extracted downloaded stock firmware file
- Extract and run spd flash tool
- From the dashboard of the flash tool, locate and load spd packet firmware file
- After the firmware has been loaded in the flash tool, click on the play icon to start the flashing process
- Now remove the phone battery, reinsert and then press and hold the boot key(volume down or volume up depending on the device) and connect the phone to pc via USB.
- The flashing process should start. Just sit still and wait for it to complete.
- [*] See full guide with screen captures here
COMMENTS