Download the official Xiaomi Redmi Note 8 2021 Stock ROM (Firmware file) from this page. This Xiaomi Stock ROM helps you to downgrade the Android vers
Download the official Xiaomi Redmi Note 8 2021 Stock ROM (Firmware file) from this page. This Xiaomi Stock ROM helps you to downgrade the Android version of the device, Unlock the device, Remove FRP protection from the device, to fix the IMEI issue, Fixing Bootloop, or any Software related issue.
The Xiaomi Redmi Note 8 (2021) phone comes with a 6.30-inch touchscreen display with a resolution of 1080x2340 pixels at a pixel density of 409 pixels per inch (ppi). It is powered by an octa-core MediaTek Helio G85 processor. It comes with 4GB of RAM. The Xiaomi Redmi Note 8 (2021) runs Android 11 and is powered by a 4000mAh battery.
This MTK-based device on the rear pack a quad-camera setup featuring a 48-megapixel primary camera with an f/1.79 aperture; an 8-megapixel camera with an f/2.2 aperture; a 2-megapixel camera with an f/2.4 aperture, and a 2-megapixel camera with an f/2.4 aperture. The rear camera setup has autofocus. It has a single front camera setup for selfies, featuring a 13-megapixel sensor with an f/2.0 aperture.
As for the custom OS, it runs MIUI 12.5 is based on Android 11 and packs 64GB of inbuilt storage. The Xiaomi Redmi Note 8 (2021) is a dual-SIM (GSM and GSM) mobile that accepts Nano-SIM and Nano-SIM cards. The Xiaomi Redmi Note 8 (2021) measures 158.30 x 75.30 x 8.35mm (height x width x thickness) and weighs 190.00 grams. It was launched in Moonlight White, Neptune Blue, and Space Black colours.
Connectivity options on the Xiaomi Redmi Note 8 (2021) include Wi-Fi 802.11 a/b/g/n/ac, GPS, Bluetooth v5.20, USB Type-C, 3G, and 4G. Sensors on the phone include an accelerometer, ambient light sensor, compass/ magnetometer, gyroscope, proximity sensor, and fingerprint sensor.
Requirements to flash this stock ROM/Firmware file
- An MTK flash tool like SP flash tool, NCK Box or dongle, Miracle CM2 MTK, Miracle Box, etc.
- Android MTK USBVCOM drivers
- A USB cord
- A computer
How to flash
- Make sure you have drivers installed.
- Power off the phone, remove and reinsert the battery,
- Download and extract firmware for your build from the link below,
- Download sp flash tool and launch, then load firmware from the directory you extracted,
- Once the firmware is loaded, click the download button and connect the phone to PC via USB;
- Wait for flashing to complete
COMMENTS